ABS is a terpolymer of three monomers: acrylonitrileA), butadiene (B) and styrene (S). The relative content of the three monomers can be changed at will to make various resins. ABS plastic has the common properties of three components. A makes it resistant to chemical corrosion, heat resistance, and has a certain surface hardness, B makes it have high elasticity and toughness, and S makes it have the processing and molding characteristic of thermoplastics and improve electrical properties. performance. Therefore, ABS plastic is a kind of "tough, hard and rigid" material with easy-to-obtain raw materials, good comprehensive performance, low price and wide range of uses. Properties: 1.Stable shrinkage, good dimensional stability, low warpage  2.Good processability  3.Balance mechanical properties  4.Good exterior, no need to be plated, sprayed  5.Flame resistant  Properties Test Method Test Condition Units Typical Values Physical Melt ...

Properties Test Method Test Condition Units Typical Values Physical Melt Flow Rate   ASTM D-1238 220oC, 10Kg g/10min - Specific Gravity   ASTM D-792 23oC g/cm3 1.03 Ash   - 800oC,30min % - Mechanical Tensile Strength ASTM D-638 50mm/min MPa 46 Elongation at Break ASTM D-638 50mm/min ...

     Medium Impact Grade . Medium Impact Strength Low Residual Monomer, Good Heat Resistance, Base Color Stability,,  Good Transparency, Easy Processing ,High Flow , High Gloss       Properties ASTM method Test Condition Unit Typical Value Specific Gravity D542 --- --- 1.046 Melt Flow Index D1238 200°C,5 kg load g/10 min 4.6 Tensile Strength at Yield D638 23°C,1/8” Sample kg/cm2 300 Elongation at Break D638 23°C,1/8” Sample % 40 Izod Impact Strength D256 23°C,A method,notched1/8”×1/2”×5/2” kg/m2 9.5   Vicat Softening Temperature D1525 1 kg load,3 mm Thick ( 120°C/hr ) °C 97 ...

Product Name POLYPROPYLENE(PP) X30G     Type                           Extruct ion  Grade                         Item Testconditon Test methode Test data Unit Physical properity density   ASTM D-1505 0.9 g/cm3 mfi   ASTM D-1238 8.0 g/10min Spiral flow length   MA18544 670 mm Elogation   ASTM D-638 12 % Merchnical properity Rockwell hardness   ASTM D-785 93 R Tensile strength   ASTM D-638 35 MPa Flexural modulus   MA17074 1520 MPa Izod impact strength 23℃ ASTM D-256 34 J/ ...

Properties: PP has the advantages of excellent comprehensive properties, good chemical stability, good shape processing performance andrelatively low cost.  PP can adapt to a wider range of application requirements through modifying, copolymerization, grafting,blending, reinforced filling, transparency, filling, weather resistance. Analysis Item Quality Index Test Result Method Appearance Colour particles,pcs/kg Big and small particles,g/kg ≤5 ≤10 0 0.3 SH/T 1541-2006 Melt Index(2.16kg),g/10min 33.0-41.0 37 GB/T 3682-2000 Tensile yield strength,Mpa ≥29 33.8 ASTM D638 Flexural modulus,Gpa ≥1.0 ...

POLYPROPYLENE (PP )   T36F   REMARK  Film grade     In the two-way stretch film is special material, suitable for BOPP, the processing requirements of high-speed production line   Features: has good processing performance, the production of BOPP film good flexible, high strength, good gloss.         Items Test condition Test methode Tst data unit Basic properity MFI     3.0-3.2 g/10min Merchnical properity Tensile strength     32 Mpa Density     9 g/cm3 IZOD impact strength     39 J/m Others Isotaxtic index     96 % ...

PP INJECION GRADE NAME ：       POLYPROPYLENE (PP) STYPE ：        HP500N Features: polypropylene, is made up of propylene polymerization and obtained a thermoplastic resin.Sorted by methyl position is divided into isotactic polypropylene, atactic polypropylene and three kinds of syndiotactic polypropylene.Polypropylene with non-toxic, odourless, tasteless of milky, high crystallization of polymer density is only 0. 90, "0. 91 g/cm3, is one of the lightest of all plastic varieties. It very stable, water in the water the bibulous rate is only 0. 01%, the molecular weight of about 8, one thousand, 150000. With good dielectric properties and high frequency insulation and is not affected by humidity, but low temperature time-varying crisp, wear-resisting, easy to aging. Item Test condition Test methode Test data unit Basic properity MFI   ASTM D-1238 12 g/10min Merchnical properity Bending modulus of elasticity   ASTM D-790A 1550 MPa Impact strength 切口 23℃ ASTM D-256A 30 j/m Yield poin ...

Product Name POLYPROPYLENE(PP)   Type Raffia Grade         SPECIFICATIONS   PP-T30S   Properties Data Sheet     Items   Unit   T30S               ITEM TEST DATE DATE UNIT           Density 0.918 g/cm3           MFR(230 ℃  2.16kg) 3.0 g/10min               Tensile Yield Strength   ≥31   MPa               Izod Impact Strength   ≥32   J/m   Notenched(+23°C) ...

Packaging & Delivery Packaging Detail: 25kg/pp bag, 17mt/1x20FCL Delivery Detail: within 10 days after order confirmation . Specifications General purpose Polystyrene /GPPS Type:General Factory supplier fast delivery Free sample   General purpose Polystyrene /GPPS Basic information on properties:   Item Testing standards   Test Conditions   Units PG-22 PG-33 PG-80 PG-80N PG-383 PG-383M Melt flow index   D-1238 200 ° C*5kg g/10min. 17.5 7.4 4.0 5.7 3.0 3.0 Softening point   D-1525 1kg. ° C 87.0 94.0 97.7 97.6 105.0 ...

pet virgin material  Specifications 1,PET (polyethylene terephthalate) 2,Granule & Flake 3,Virgin & Recycled 4,SGS,BV,CIQ test 5,Factory price & Free sample Product name:PET resin  Specification: Water Bottle-grade PET Chips Quality Indices for Water Bottle-grade PET Chips Item Unit Index I.V. dL/g 0.80±0.02 Crystallinity % ≤60 Color value L - ≥83   b - ≤1.0 Content of COOH mol/t ≤25 Content of acetaldehyde ppm ≤1.0 Dust content ppm ≤100 Melting point °C 243±2 Wt. of 100 chips g 1.55±0.10 ...

Product: Polyamid (pa66) Grade: Impact modified & Super toughened CAS NO.: 9003-53-6 HS Code: 3903110000 Specification, TEST ITEMS TEST METHOD AND CONDITIONS RESULTS TEST METHOD UNIT CONDITION (DRY)23   Density ISO1183 g/cm3   1.1 Melt Volume Rate ISO1133 cc/10min (275)2.16kg 43.2 Tensile Strength ISO527 MPa 10mm/min 67.8 Tensile strain at break ISO527 %   5 Flexural Modulus ISO178 MPa   2,800 Flexural Strength  ISO178 MPa 2mm/min 82 Charpy Notched ISO179 KJ/m2 2.9m/s-1J 11 ...

Packaging & Delivery Packaging Detail: 25kg/bag,pp woven bag with polyethylene film inside(can be customizable by customer) Delivery Detail: Wthin 7 days receiving the deposit Specifications Advantage: 1,Aging Resistance; 2,High Impact Strength, 3,Heat Resistance;Good Abrasion...   Product Information Properties Item Test Method Unit Data Physical Property Density GB1033 g/cm 3 1.23 Mechanical Property Tensile Strength at Yield GB/T1040 Mpa 73 Elongation at Break % 4 Flexual Strength GB/T9341 Mpa 170 Flexual Modulus Mpa 4900 IZOD Notched Impact Strength ...